Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 30, No. 5 (2006)

Stuart Gunness

Stuart Gunness, 6220 165 th Ave. S.E., Walcott, N. Dak. 58077 (ph 701 372-3761)

“I overhauled the pivot arms that hold the double disc seed openers on my 1992 Deere 9300 40-ft. drill. I used bolts and bushings instead of replacing the original rivets. The problem is that when the rivets wear out, the piece the arm pivots on also wears out. Replacing the rivets and this piece costs about $16 per arm.

“I removed the rivets and drilled out the piece that the arm pivots on to 3/4 inch. Then I moved the pivot arms from outside the disc opener to the inside. Then I installed two bushings (JD part no. A41207), a 3 1/2-in. length of 1/2-in. pipe as a spacer, and a 7/16-in. bolt to reassemble it. The pipe keeps the bushings from twisting as they wear.

“I made the conversion four years ago and installed new discs at the same time. It was a big job, but I saved a lot of money. I paid $1 apiece for the bushings. My total cost was only about $3 per set of disc openers. The same idea would also work on older Deere LLA drills.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.