Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 30, No. 4 (2006)

Jack Lifts Riding Mowers

Featured source: MoJack

If you’ve ever had trouble changing blades or cleaning the deck on a riding mower, you’ll be interested in this new jack that’s designed to make the work a lot easier.

The Mo-Jack was invented by farmer Norman Krug (Vol. 29, No. 4) and, after some re-engineering, is now on the market. The patented unit works with a self-braking winch and strap and comes with jack stands for safety.

The self-braking winch lifts the mower on a T-shaped lift bar that supports the mower’s front wheels.

To use, just roll the front wheels onto the lift’s wheel pads and crank it up about 18 in. Place a pair of jack stands under the T-bar and insert a safety pin through a hole in the jack’s tower, then apply the parking brake on the mower. The large base frame provides solid support.

By removing the wheel pads from the T-bar, the unit can also be used to change a flat tire, using the T-bar to support either the front or rear end of the mower frame. Just crank the self-braking winch until the wheels clear the floor, then apply the parking brake or place wheel chucks behind the mower’s tires.

Three different sizes are available.

They all sell for $250.

Contact: FARM SHOW Followup, Mid-Kan Inc., 405 E. Albert Ave., Maize, Kansas 67101 (ph 316 722-6836; fax 316 722-9039; www.mid-kan.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.