If you own a Deere 9000 series combine, chances are you’ve had problems with the concave adjustment actuator rod. If the rod bends or the nut pulls out, you’ve got to replace the entire actuator motor, and that can get expensive.
In Canada, the cost is about $900 not including labor and down time. That’s why a customer who had to replace the actuator three times, asked Mark Petty, a repair shop operator in Blackstock, Ontario, to find an alternative.
Petty created a thicker stainless steel rod with a bronze nut that fits into the motor.
“It’s a permanent solution to the problem,” he says.
It takes about an hour to replace the piece.
“It’s not hard to do.”
Petty says the original piece, made by Warner Electric, may have been put on other combines, but he doesn’t know which ones.
“Up here, Deere is the most common combine.” He says newer Deere machines don’t have the problem.
Sells for $240 (Can.) plus S&H.
Contact: FARM SHOW Followup, Mark Petty, 2850 Church St., Blackstock, Ontario L0B 1B0 Canada (ph 905 986-1521; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.