Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 6 (2005)

Daniel Krenzel

Individual tip 1 of 2 from this reader’s published contribution.
Daniel Krenzel, Cullman, Ala.

“I repaired a weed eater motor rod by welding it while it was nearly submerged in distilled water. I welded it right up against the needle bearing on the ends without loosing the composite needle spacers inside the bearing.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.