Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 6 (2005)

Gary Noblit

Individual tip 2 of 2 from this reader’s published contribution.
Gary Noblit, Jonesville, Mich.

“The wheel hubs on a lot of new equipment - such as hay tedders, inverters and riding mowers - come without any grease zerks, which is unfortunate because it can lead to premature failure of the wheel bearings. I think it’s worth taking the time to install your own grease zerks. All you need is a drill and a wrench. Just drill a hole in the hub, tap in threads, and use a wrench to screw in the zerk. I installed grease zerks 1 1/2 yrs ago on a Case 580 backhoe. I had to take the wheels apart anyway because the hubs were worn out and needed to be replaced, so I decided to install grease zerks at the same time. I haven’t had any problems with it since then. Even if you don’t have to replace the wheel hubs, you should take the wheel apart anyway in order to keep metal shavings from getting inside the hub as you drill the hole.

“The grease zerks make it easy to the bearings well-greased and should greatly extend their life. And by filling the inside of the hub with grease, you also keep most foreign material out.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.