Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 4 (2005)

Marvin Kroontje

Individual tip 1 of 2 from this reader’s published contribution.
Marvin Kroontje, Magnolia, Minn.

“I use a 1/2-in. dia., 3-ft. length of galvanized water pipe - with the last foot curved - to tighten belts on vehicle alternators, power steering units and air conditioning units. It makes a great pry bar once the bolts have been loosened and allows me to leverage the unit tight before I retighten the bolts. I got the idea for using it when I was trying to tighten up an alternator but couldn’t get anything in the engine compartment to fit right. I found the pipe laying on the ground. The pipe is straight for about 2 1/2 ft., then makes a gentle curve and continues straight for about another foot. The curve allows it to fit into places where a conventional straight pry bar won’t fit. I’ve used it a lot.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.