Don built a low-cost, portable tool rack that measures 6 ft. high and rides on four small caster wheels. A 20-in., 4-WD wheel hub serves as the base. Wheel bearings are welded into the hub and allow it to rotate. A 1-in. dia. shaft welds to the middle of the hub and is separated at various lengths by 5-in. long, 1 1/4-in. dia. spacers, to accommodate tools of varied length. A series of 12-in. dia. metal discs off a Krause disk, with its original one-way bearing still in it, fits upside down over the top of each spacer. The discs still have their original one-way bearings which allows each disc to rotate individually. A series of 3/4-in. dia. metal rods are welded to the edges of each disc 2 to 3 in. apart and are used to hang the tools.
A big nut on top of the shaft keeps everything solid.
“I use it to store everything from box end wrenches to pipe wrenches and crescent wrenches,” says Catron.
“The 3/4-in. dia. metal rods are the broken teeth off old side delivery rakes.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.