Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 1 (2005)

Bayard G. Young

Bayard G. Young, Elkwood, Va.

“Here’s an easy way to change your own oil and filters and do other under-body work. I wish I had built this car rack years ago.

“The ramp is 15 ft. long and made out of treated lumber, with 2 by 8’s for the main ramp boards and 4 by 4’s for the uprights. The front post is 22 in. high and I put a stop block at the front of each ramp. The uprights on each side are staggered to balance the load and there are cross boards for strength. I used steel cable to brace the center of the ramp, running between posts on either side.

“When the ramp is not in use, I can just lift it up and store it on its side.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.