Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 3 (2004)

Trevor Shute

Trevor Shute, RR 6, Guelph, Ontario, Canada N1H 6J3 (ph 519 822-6705)

“Here’s a tip to prevent scalping or ripping out chunks of lawn when plowing snow. I removed the skid plate from the bottom of my 7-ft. scraper blade and replaced it with a section that I cut from an old 8.75 by 16.5 truck tire. I used a Sawzall to cut the tire about 3 in. around the sidewall and the same around the tread, leaving an L-shaped rubber ring. Then I rolled out the rubber and used 5/8-in. bolts to attach it to the blade. To drill the holes, I clamped the rubber in the desired place on the blade and marked the holes, using spray paint from the backside. This made drilling in a press a lot easier than using a handheld drill. I’ve used this idea for about five years now and haven’t torn up our lawn once. I can plow snow off a paved driveway and onto the lawn without damaging it.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.