Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 1 (2004)

Home Built Shop Elevator

Featured source:

Instead of climbing stairs to get up to the 8-ft. high upper deck in his shop, Harry Engeland bought and modified an “electric-powered” platform. The unit was originally designed to lift a project up 3 ft. so it would be more accessible to work on.

Its electric motor drives a gearbox that winds a cable which raises or lowers the workbench.

“On back of it, there are rollers that run in a track and I just extended the track and put a new cable on. I also installed switches to start the lifting and lowering,” Engeland says.

Contact: FARM SHOW Followup, Harry Engeland, R.R. 4, Stratford, Ontario, Canada N5A 6S5 (ph 519 273-1983; fax 519 271-1826).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.