“In your last issue I read the article by David Sheffield on carbonized rods. I remember as a young boy my dad welded up the worn drawbar holes on our tractor using hard surface welding rods and keeping the holes open using a carbon rod. The rod came from the center anode from our telephone batteries.
“The rod was 1 in. in diameter and 6 in. long, and made from very dense carbon/graphite. He would reduce the rod to the size he needed with a grindstone to fit the intended size of the hitch hole. He then just fill-welded the hole from bottom to top. He would cut the carbon rod away from the bottom with a hacksaw, leaving the weld locked piece in the hole and put the remainder into our welding supply box for the next time. The piece welded in place was then pulverized with a punch and we were ready to hook up and go.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.