Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 1 (2004)

Chris Gilbert

Chris Gilbert, Waterford, Mich.

“I had a shaft with threads damaged so badly that I couldn’t put a new nut back on. I tried using my trusty re-thread files with no luck. Then I thought about how I fix the problem when I cut a piece of threaded rod by putting the nut on first and then screwing it off after cutting to push the threads back into place. So I did just that. I cut a nut in half from point to point and then used a locking pliers to hold the nut together around the threaded part that’s still good. Then I unscrewed over the damaged threads. I’ve used this idea on many different kinds of shafts and bolts.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.