“I made a tool for knocking tire beads off wheel rims when changing or patching tires. It’s quite simple. A solid steel rod fits inside a larger pipe. At the bottom of the pipe, there’s a short length of rod flattened to form a wedge. This wedge is free to move up and down about 1 1/2 in. on top of a spring that’s held in place by two welded-on collars. The flattened end is pushed between the rim and the tire. Holding the pipe with one hand, I use the inside rod to hammer on the bottom piece which forces the bead off the rim. It usually takes just a few blows to knock the bead off. I’ve used it on everything from car tires to big truck tires.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.