Jesse’s a diesel technology student at Lake Area Technical Institute, Watertown, S. Dak. He and Steve Peters, a diesel instructor, came up with an inexpensive way to recharge 90-amp Nippondenso alternators commonly found on Deere tractors.
According to Larson and Peters, the alternator can quit charging when a diode/resis-tor unit - made up of two diodes and a resis-tor - fails. This unit is integral with the alternator’s stator/rectifier assembly, so if a single diode fails the entire stator assembly has to be replaced at a cost of about $200.
“The stator assembly often costs more than it would cost to replace the entire alternator with a rebuilt unit,” says Larson.
He and Peters solved the problem by re-moving a diode/resistor unit from a used Delco 10 SI alternator, modifying it slightly, and installing it on the Nippondenso alternator. Total cost was less than $5.
“Delco alternators are widely available so there’s no shortage of diode/resistor units,” says Larson.
“To install the diode/resistor we drilled out some rivets and then soldered the unit onto the old diode mounts and hooked the resistor into it.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.