“When installing pistons on air compressors or small engines, I would sometimes break the rings since I don’t have the special pliers needed to compress them. I’ve eliminated the problem by first wrapping the piston in a piece of smooth tin that’s the same height as the piston, but leaving two ‘ears’ on the ends so I can tighten the tin up like a clamp around the piston with vise grips to compress the rings. Then I just tape the piston down into the cylinder. Works slick.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.