Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 2 (2002)

Richard Senters

Richard Senters, 216 S. Chestnut St., Beloit, Kansas 67420 (ph 785 738-5462)

“I recently designed an air vent that installs in the lid of a 5-gal. bucket and keeps the bucket’s contents from sloshing out unevenly when pouring.

“I start with an empty bucket. The first step is to remove the core from a tire valve stem.

Then I drill a hole in the bucket lid that’s the same size as the middle stem of the valve. To ‘seat’ the valve stem, I stick it up through the hole and then drop a string down through the valve and tie a large washer to the end under the valve. Then I pull upon the string until the valve stem is sealed in the lid.

“When not in use, I put the valve stem cap back on the valve.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.