Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 2 (2002)

Doug Phillips

Doug Phillips, Zearing, Iowa

“I used a 1/2-in. dia. wooden dowel to keep the V-belt on back of my Deere 8820 combine, from flopping around too much. The V-belt drives the combine’s straw chopper and is located alongside the back part of the combine. The 8820 combine normally comes factory-equipped with two hollow metal “bumpers” that mount vertically on the side of the combine, one above the other, The bumpers are designed to keep the belt from contacting the side of the combine and ruining the paint job. However, I bought the combine used with only the bottom bumper still in place.

“The belt bounced around quite a bit on top of the bumper. I was worried it might catch on the bumper and cause the straw chopper to plug up. I made a quick fix in the field one day by sticking a broom handle into the lower bumper. Later I replaced the broom handle with a dowel.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.