“I came up with a handy way to operate air tools in my 2 1/2-car garage-shop. I ran 1/2-in. dia. PVC lines up one wall, along the ceiling, and down the opposite wall. An air compressor is hooked up to a ‘T’ coupler that’s mounted on one wall. There’s also a T coupler on the ceiling, with an air hose hanging down from it, and a coupler on the other wall. Every time I want to use an air tool I just plug it into a coupler. It’s really handy to use because I don’t have to drag air hoses across the floor. I used PVC lines instead of other material because PVC doesn’t draw as much moisture. I use a brass ball shut-off valve to keep air from leaking out of the compressor, and an in-line water filter to keep water out of the lines. I use brass fittings wherever I can in order to further help keep rust out of the lines.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.