Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 1 (2002)

Jim Hefner

Jim Hefner, Lima, Ohio

“After years of wrestling with T-rail mounted duals on my 4240 and 4440 Deere tractors, I came up with a device I call the Dual Buster.

“It works in reverse of the snap couplers that hold the duals on the T-rail. Rather than pulling the handle into a locked position to hold the duals together, my Dual Buster pushes them apart.

“Before I made this, we used crowbars, wrecking bars, and even log chains to break them apart. Now, we just drive the inside wheel up on a block, remove the snap couplers and then use the Dual Buster at the bottom to snap them apart. It works great and it’s a lot easier. When the outside wheel comes loose, it just drops to the ground.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.