Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 1 (2002)

Robert T. Valentine

Individual tip 1 of 2 from this reader’s published contribution.
Robert T. Valentine, Wolsey, S.Dak.

“After reading about Dale Krueger’s battery box conversion for his 4020 Deere tractor (Vol. 25, No. 6), I wanted to tell you how I solved the same problem.

“I was very dissatisfied with the 2-battery box system on my Deere. I eliminated the right side battery box and rebuilt the left side battery box as follows: “I cut the outside panel out of the box and then welded additions to the bottom and end panels to make the box wide enough to accept two 900-amp batteries. I welded in a divider between the two battery compartments to reinforce the box because of the extra weight. I welded a 5/16-in. bolt on the inside of each end to hold the side cover on.

“I used a metal brake to bend the ends and bottom of the side cover to overlap the existing box. The side cover attaches with a pair of wing nuts.

“This modification has worked great. Now the batteries are easy to remove when necessary, and the box can be tilted out on the regular battery box pivots to connect cables, check the water, etc.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.