Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 1 (2002)

Peter Ceres

Peter Ceres, Neilburg, Sask.

“Here’s how I pull stuck bearings and hubs. I weld a piece of pipe to the bearing and then weld a nut to the end of the pipe. Then I screw a bolt into the nut to use to pull the stuck bearing off. The heat generated by welding helps, too, by expanding the bearing.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.