Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 1 (2002)

Brian Haubrich

Individual tip 3 of 3 from this reader’s published contribution.
Brian Haubrich, Glenbain, Sask.

“I used the hydraulic hoist out of an old truck to make an 8-ft. high hydraulic press. The tube part of the cylinder where the snap rings hold the piston plug in had ‘mushroomed’ so that it was no longer usable. My brother-in-law made two 1-in. plates which hold the cylinder together with six 1-in. threaded rods so the piston plug can’t come out. The rest I built with new iron, a new electric 1 hp motor, anda hydraulic power pack.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.