Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 5 (2001)

Stan McDonald

Stan McDonald, Foxboro, Ont.

“Like other FARM SHOW readers, I like to build the things I need. That often means cutting flat bars, channel iron, and so on. So I bought a powered bandsaw. The problem I ran into is that the blade on the small imported saw did not last long due to the lack of coolant. Also, the stand was flimsy. I guess you get what you pay for.

“So I built my own stand from square tubing which allows me to add coolant as I cut. The stand cost $125, not including the expense of a coolant pump. I figure the investment will pay for itself by extending the life of blades about 5 times. I’ve also noted that using bi-metal blades also increases blade life, when compared with dry cutting.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.