Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 1 (2001)

Keith D. Hight

Keith D. Hight, Spearman, Texas

“To keep dust caps from falling off wheel bearings, I bend a metal strip into an ‘S’ shape and drill a hole into one end. Then I remove one of the lug nuts from the wheel and slide the strap over the bolt, then press the opposite end of the strap down onto the dust cap and retighten the nut. It’s a simple, low-cost solution.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.