Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 5 (2000)

Matthew Lebold

Matthew Lebold, Kennbeek, Ontario

“In our shop, we have worked on a number of stuck priority valves. To remove them, we slip a 4-in. length of plastic fuel line onto a piece of 1/4-in. threaded rod. Next we put a nut on each end of the rod and slip the assembly inside the priority valve. Then we simply tighten the lower nut so that it pushes on the tube and expands it. Then you just pull and the valve comes out.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.