Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 5 (2000)

Bruce Ogram

Individual tip 2 of 3 from this reader’s published contribution.
Bruce Ogram, Elmira, Ontario

“When the rectangular tip on the rotating cable on the hour meter on my 1961 Fordson Super Major lost its drive inside the matching female connection in the gear drive, I just cut off a piece of old panty hose about 3/8 by 2 in. long and wrapped it in reverse around the inside cable. Then I intered this built-up inner rotating cable to the female drive and snugged up the hold-down nut. Problem solved and the hourmeter works great again. You just have to be sure not to use too much nylon which would put too much pressure on the rotating cable.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.