Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 5 (2000)

Bruce Ogram

Individual tip 1 of 3 from this reader’s published contribution.
Bruce Ogram, Elmira, Ontario

“Here’s how I made a simple fuel gauge for my antique 1961 Fordson Major diesel tractor. I used a piece of clear plastic-type tubing meant for immersion in gasoline or diesel fuel which I got at a hardware store. This tube is 3/8-in. dia. and is tee’d into the metal fuel line below the fuel tank, close to the shut-off valve. I ran the tubing up over the tank and down under the other side of the tank. I stuffed some rolled-up fabric inside the open end of the tube to keep out bugs and dirt. The fuel in the tube simple rises to the same level as in the tank, making it easy to tell at a glance how much fuel is left. Very handy.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.