Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 2 (2000)

Colin Collins

Colin Collins, Myrtle, Miss.

“The Powershift on older Deere tractors with cables can be hard to shift. I clamped a rubber hose onto the cable cover, and clamped a grease zerk into the other end of the hose. Then I pumped grease through the length of the cable. The tractor now shifts like new. One cable was full of dirt and dry grease. To clean it before greasing, I clamped a tire valve stem into the hose after first filling the hose with parts cleaning fluid. Then I blew in air to clean the cable by forcing the fluid through. This repair works best if you work from the lower end of the cables at the transmission where it’s easiest to detach the cables.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.