Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 1 (2000)

Ron Saltzman

Individual tip 2 of 2 from this reader’s published contribution.
Ron Saltzman, Corning, Iowa

“To keep ears of corn from flipping out of the feederhouse on my Deere 7720 combine, I made my own ‘corn saver’. I used a curved angle iron frame that came off an old Deere pull-type rotary hoe and welded expanded metal onto it, bending the metal to match the curve of the angle iron. The angle iron bolts onto the header. I made a hinging mechanism so that the corn saver can be flipped up out of the way whenever I need to work on the header. It works good and cost almost nothing to build. I paid $10 for the expanded metal. Commercial models sell for about $200.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.