Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 5 (1999)

Norman Smith

Norman Smith, Walsh, Ill.

“I used part of an old hydraulic cylinder shaft to make an inexpensive, heavy hammer. The shaft had been accidentally bent. I cut off a length of the shaft and burned a hole through it. I used a length of sq. steel tubing to make the handle and butted the two pieces together, then ran a bolt through the shaft and tubing and fastened a nut to the bottom of the bolt.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.