Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 4 (1999)

Dale Spoerl

Individual tip 1 of 2 from this reader’s published contribution.
Dale Spoerl, Elizabeth, Ill.

“I made my own 4-ft. wide dust pan on wheels that works great for removing dried mud, metal shavings, etc., from my shop floor. The pan is made from sheet metal and is about 10 in. deep and 4 in. high at the back. The back side is connected to a the handle and rear wheels off an old lawn mower. To use the unit I just push it ahead of me as I walk. I welded the brackets that formerly controlled the mower deck’s height to the back of the dust pan, allowing me to adjust the angle of the pan.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.