“I also made my own chop saw by mounting a 14-in. dia. cutting wheel on the threaded end of a 1-in. dia. shaft which rides on two 1-in. pillow block bearings. The wheel is belt-driven by a 1 1/2 hp electric motor equipped with a gear reduction pulley. The saw table is built out of sq. steel tubing and flat bar. The saw hinges on a length of sq. tubing that rides inside two short lengths of round pipe. The motor is mounted behind the saw and serves as a counter balance to keep the saw in the ‘up’ position until it’s needed. A steel guard protects the operator. We use this saw a lot in our shop to cut anything from 3/4-in. sq. tubing up to heavy truck springs.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.