Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 4 (1999)

Barry Clohassey

Individual tip 1 of 2 from this reader’s published contribution.
Barry Clohassey, Tignish, P.E.I.

“With good bench grinders selling for $75 to $150, I decided to build my own using a pair of 1/ 4 hp electric motors salvaged from old household appliances. I welded a 3 1/2-ft. length of 2-in. dia. steel pipe on top of a 15-in. dia. wheel rim, which serves as the base. A rectangular steel bracket was welded on top of the pipe and the motors were then fastened on top of it. Both motors are wired to a switch that mounts under the bracket. One motor drives a grinding wheel and the other motor drives a wire brush. I had an electrician re-verse one of the motors so that both of them turn in the same direction. My total cost was only about $20.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.