Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 2 (1998)

Use Your Drill To Extract Broken Bolts

Featured source:

Extracting a broken-off bolt or screw is quick and easy with the “Drill-Out” power extractor. It’s a bit and extractor rolled into one.

It consists of a left-handed, self-center-ing bit that you use to drill down into the broken-off bolt. After making a 1/4 to 1/2-in. deep hole, you spin the extractor fitting and hex head down close to the cutting tip.

“The torque of the drill in reverse action allows the extractor to grab the inside shoulder of the bolt and pull it out without spreading it out tighter than it already was,” says Steve Reisinger, NR Specialist Group, Omaha, Neb.

“So even if the bolt resists extraction the drill-out won’t lodge itself into the bolt and become impossible to remove. You’ll never end up with the extractor stuck in the bolt.

“If the drill runs out of torque or if you can see that the bolt won’t come out, you can put an end wrench on the the hex head and turn it 1/4 turn in order to remove the extractor from the broken bolt.”

Available in two sizes, regular and micro. The regular handles 1/4 to 3/4-in. dia. bolts and the micro handles 1/8 to 1/4-in. dia. and bigger bolts.

The two sizes are sold individually in 4-piece kits or together in a 7-piece kit and come with a lifetime guarantee. The 7-piece kit sells for $89.95.

Contact: FARM SHOW Followup, NR Specialist Group, Box 45282, Omaha, Neb. 68145 (ph 800 772-1450 or 402 891-8292).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.