Glenn keeps his shop in order and his tractor clean with these ideas he came up with in the past couple of years.
“I built a ‘Ferris wheel bolt bin’ to hold bolts and spare parts by cutting a sheet of 4 by 8 plywood in half and rounding off the corners so each section is a circle. I ran a 1 1/ 2-in. dia. pipe through the center of each circle section and mounted 12 rows of five elevator grain cups between the ends. I mounted each row of cups on a 5/8-in. dia. rod that runs through the center of each cup and attaches to each end wheel, permitting them to rotate with the Ferris wheel, which rotates on a stand I built out of scrap iron. The unit stands about 6 ft. high and everything’s at eye-level so I can instantly identify the bolts or spare part, such as sickle sections or bearings. I bought brand new grain cups at $2.75 apiece for my bin so my cost was about $250. But you could just as easily use used cups or ones that an elevator’s throwing away to keep the cost down.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.