Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 6 (1997)

Roger H. Bean

Roger H. Bean, Haydenville, Maine

Source context: Printed page 31 is PDF page 30: the scanned printed22–23 spread occupies one PDF page in this issue.

“To keep the ends of steel cable from unraveling when you cut with a bolt cutter or other tool, I use my 225-amp Lincoln welder to cut through cable. I turn the welder up as high as it’ll go and use a worn out welding rod to cut the cable. This melts all the strands in the cable ends together and prevents unraveling. I’ve cut steel cable this way for as long as I remember and it really works slick.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.