Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 6 (1997)

George H. Hall, Jr.

George H. Hall, Jr., Somerset, Ky.

Source context: Printed page 30 is PDF page 29: the scanned printed22–23 spread occupies one PDF page in this issue.

George built a “poor man’s” wick wiper out of a cattle oiler rope and a few other odds and ends.

“I used 10 ft. of oiler rope wrapped around a 1 in. dia. 10-ft. long pipe. I tied the rope to the pipe with some smaller rope I had around and then tied two boxes of ‘face flips’ onto the larger rope. I slipped the pipe horizontally onto the hay forks on back of my tractor and drove out to the pasture. I soaked the rope in 2-4,D and water, which then saturated the 44 ‘face flips’ tied to it. I lowered the forks so the Face Flips dropped down 6 to 8 in. below the tops of the weeds and rode around the pasture, stopping periodically to re-coat the rope with chemical. Cost of the oiler rope was $15 and cost of the ‘face flips’ was $20. The idea has worked great on three or four farms. Kills weeds in a couple days. I would suggest using this with a front mounted tool such as loader. That way you’re not running weeds down with the back tires of the tractor before they’re treated.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.