Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 6 (1997)

Carroll Kerley

Carroll Kerley, Peck, Kan.

Source context: Printed page 30 is PDF page 29: the scanned printed22–23 spread occupies one PDF page in this issue.

Carroll came up with a low cost way of repairing the openers on his Deere 494 4-row planter.

“I cut off a piece of a worn out cultivator sweep and properly shaped it to fit the opener. I then weld it to the bottom of the old opener. I weld a little hard facing onto the leading edge and it works better than new. This re-pair can be done for little or no money, while Deere wants $46 apiece for new openers.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.