Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 5 (1997)

Lane Damberger

Lane Damberger, Box 133, Donalda, Alberta, Canada T0B 1H0 (ph 403 883- 2362 or 2400)

Source context: Printed page 34 is PDF page 33: the scanned printed22–23 spread occupies one PDF page in this issue.

“I work for an oilfield manufacturing plant and made a small motorized cutting machine which I use on my job. I use it every day. It lets me make perfect cuts in carbon steel using an acetylene torch or stainless steel torch equipped with a plasma cutter. It’ll cut straight or beveled. I’ve used it to cut steel from 1/8 to 4 in. thick with no problems as long as the proper tip and pressure settings are used. I call it the RD100 Tracmac. I’ve got plans and a video tape I’d be willing to sell if there’s interest.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.