Source context: Printed page 34 is PDF page 33: the scanned printed22–23 spread occupies one PDF page in this issue.
“Large holes can be bored on a lathe without having to use a time-consuming face plate mounting. A 1 1/2-in. long piece of pipe, faced square, and with an inside diameter slightly larger than the outside diameter of the desired hole, is accurately positioned on the plate. Attach to the plate with 3 1/2-in. long welds positioned 120 degrees apart. Put the pipe in a 3-jaw universal chuck and bore the hole. Use a disc grinder to carefully re-move the tach welds.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.