Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 5 (1997)

Danny Bigler

Danny Bigler, Floyd, N.Mex.

Source context: Printed page 33 is PDF page 32: the scanned printed22–23 spread occupies one PDF page in this issue.

“I was working in my shop last winter and needed steel cut at a different angle so I went to town and bought several steel cutting blades for my electric saw. They were expensive and I used them all up. Then I thought about all those blades from my cut-off saw that I threw away when they got worn down. They were the right size but the hole in the center was too large so I found a washer that would fit the shaft of my saw and the hole in the blade, putting a larger washer on each side of the blade. It worked as good as the expensive blades I was buying and they last as long or maybe longer.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.