Source context: Printed page 32 is PDF page 31: the scanned printed22–23 spread occupies one PDF page in this issue.
“I built this welding table for my shop out of scrap materials for about $20,” Harlan says.
“The top is an old wheel out of a stationary silage cutter. It’s 34 in. in dia. and is 3/4-in. thick. It has holes spaced throughout and I left the stub shaft axle in the middle so I can use it to bend light gauage iron. The three legs are made from 2-in. dia. pipe braced with 1/4 by 2-in. angle iron.
“I mounted a grated shelf, which I use to store my metal chop saw and miscellaneous materials, underneath the table. I fitted pegs on the front to hold my chipping hammer and steel brushes. I fitted the back two legs with 4-in. dia. caster wheels so the table is easy to move around the shop. The table is 36 in. high and is heavy-duty enough to hammer on.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.