Source context: Printed page 32 is PDF page 31: the scanned printed22–23 spread occupies one PDF page in this issue.
“Here are before and after photos of a 1,500-gal. VanDale tank wagon that imploded as it was being emptied. We replaced the tank for about half of what it would have cost had parts and labor been done at the factory.
“That’s our business, rebuilding virtually any brand tank, vacuum or topfill. We manufacture replacement tanks for Clay, VanDale, Badger, Better-Bilt, Calumet and Harvestore wagons, to name a few, out of 1/4-in. thick steel, which is 1/8 in. thicker than the original tanks many wagons are equipped with. We start with 800 gal. tanks for $2,300 and build up to 6,000 gal. Prices include remount-ing good original parts; any valves, fittings and/or plumbing is extra. Replacing tanks typically takes two to three weeks.
“We also manufacture replacement components such as moisture traps. We also stock a large number of replacement parts and manufacture tanks only.”
Contact: FARM SHOW Followup, Du-Mar Welding, 2858 E. 650 N., Rochester, Ind. 46975 (ph 888 223-9891 or 219 223-9889).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.