New “welding spoon” provides a bridge for the weld, making it easier to weld cracks and holes in metal or to weld two pieces of metal that don’t fit well together, says Tahenh Machining & Fabricating, Delmont, S. Dak.
The “welding spoon” consists of a 1/8-in. thick, 2-in. wide by 3 1/2 in. long copper plate mounted on an aluminum handle with a rubber grip. You hold the plate behind the crack or gap as you weld. The plate pulls the heat away from the molten material and supports the weld so that a steady bead can be laid down along the length of the crack. The molten material doesn’t adhere to the plate. After making one pass with the plate you can pull it away and further build up the bead.
“It eliminates having to always start and stop, waiting for the bead to cool off, as you build up the gap,” says Steve Gundrum, spokesman for Tahenh Machining, manufacturer.
“The spoon pulls the heat away and keeps the arc from burning through or warp-ing light sheet metal behind the gap. It works a lot better than using a hunk of copper because the handle makes it much easier to use. It works on all types of welders - stick or wire-feed, and on coated or non-coated wire.”
Sells for $14.95 plus S&H. The company also offers welding spoons in other shapes and sizes for use in hard-to-reach areas and for use when welding thicker steel. A kit that includes three different spoons sells for $21.95 plus S&H.
Contact: FARM SHOW Followup, Tahenh Machining & Fabricating, Box 216, Delmont, S. Dak. 57330 (ph 605 779-2121; fax 3321).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.