Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 4 (1997)

Landis Shelton

Individual tip 1 of 3 from this reader’s published contribution.
Landis Shelton, Webbers Falls, Okla.

“I read about the ‘Weed Eater’ line trimmer guide that lets Dennis Lenart of Waco, Texas, trim along fences or buildings (Vol. 21, No. 3). I made my own version by bending a length of 1/2-in. dia. conduit pipe into a semi-circle to form a guard and welding it to the Weed Eater shaft. The guard is offset so I can trim weeds a full 6 in. from the fence or right up to it. A pair of hose clamps connect an arm on the guard to the Weed Eater shaft. I move the clamps up or down depending on the height I want to cut.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.