Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 4 (1997)

Floyd E. Ver Ploeg

Individual tip 1 of 3 from this reader’s published contribution.
Floyd E. Ver Ploeg, Lovila, Iowa

“I retired from Maytag as a journeyman machine repairman 12 years ago and now operate a welding and machine shop for local farmers. Over the years I’ve picked up a few ideas that may help others.

“If a nut, bolt, or pulley gets frozen by rust, just heat it real hot, then pour water on it until it’s cool and it’ll come loose. However, don’t pour water on a cast iron part as the fast cooling will cause the cast iron to explode. Just heat it.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.