“I built an ‘equalizer hitch’ to make my 1984 Ford F-150 steadier under load by allowing weight to be transferred back onto the trailer. It consists of half a leaf spring off a 3/4-ton International truck. It extends out the back of the pickup and connects to the trailer neck.
“The spring U-clamps in a box, made from 1/2 by 3-in. flat stock, that pivots on a 1-in. dia. pin centered directly under the ball hitch. A recessed spacer under the ball nut provides clearance between the pin and hitch for a roll or cotter pin that secures the 1-in. pin. A 3/4-in. dia. Grade 8 bolt secures the front straps to your receiver tube whilea chain provides vertical adjustment. A 3-in. channel cleat works on V-neck trailers; a U-clamp works on tubing tongues. To unhook a trailer, you simply loosen the 3/4-in. bolt. One caution: the trailer neck must be able to handle the added loading, so you may need to reinforce it.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.