Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 4 (1997)

Bill Short

Individual tip 1 of 2 from this reader’s published contribution.
Bill Short, Hamilton, Mo

“Hacksaw-ing a groove in the side of grease fittings to relieve pressure as you fill bearings with grease is an easy way to prevent damage to grease seals. You just cut a groove along one side of the threads. This lets air out as you pump in grease. When grease starts to come out, you stop. It keeps grease from pushing out on the bearing seals.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.