Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 2 (1997)

Steve Matthews

Steve Matthews, Berthoud, Colo.

Steve made a nifty adjustable welding table that mounts on a 4-in. pipe in his shop.

An old corn chopper flywheel, which is about 4-ft. in dia., slips up and down on the pipe which is cemented in the floor and runs up to the roof. Steve made a locking collar out of a piece of pipe so he can lock it in place at any height.

“It makes a dandy welding table because it spins like a lazy Susan,” notes Steve. He also slipped a large disc blade onto the pipe and welded it in place above the flywheel to hold tools.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.