Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 2 (1997)

Charlie Stough

Charlie Stough, Thermopolis, Wyo.

“There are many problems with the thermal linear actuator used to engage the 4-WD on late 1980’s GM pickups through current models. It’s an electro-mechanical part with an atrocious failure record. GM replaces over 100,000 a year. There are a few replacement parts on the market but they, too, are mechanically complicated so they’re hard to install, not very reliable, and relatively expensive.

“We’ve come up with a solution to the problem. It’s called the PAD (positive actu-ating device), a non-mechanical, static unit that’s guaranteed for life. It replaces the thermal linear actuator. After installation, both front axles turn at all times, even in 2-WD. The front driveshaft is constantly engaged at the front differential, but disengaged at the transfer case until you activate 4-WD. This doesn’t cause additional wear to U-joints or front driveline and you shouldn’t notice any real drop in gas mileage.

“Any shade tree mechanic can install a PAD in 10 or 15 minutes. They sell for $64.99.”

Contact: Precision Auto Parts, 210 Suite 4, Highway 20 South, Thermopolis, Wyo. 82443 (ph 307 864-3490).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.